TestoView 318 Series Fiber Optic Boroscopes with Flexible Shafts & Fine Tune Focus

Environmental Monitoring & Industrial Hygiene Instrumentation Brandt Instruments Distributing Testo

TestoView 318 Series Fiber Optic Boroscopes
A flexible tool for inspection of inaccessible areas

Get the inside picture without
taking it all apart!

TestoView 318 Series Fiber Optic Boroscopes

The Testo 318 series lighted, fiber optic scopes bring into focus the hundreds of maintenance and repair problems that can't be seen without costly and time consuming disassembly.

The TestoView 318 Series Fiber Optic Boroscope's revolutionary flexible shaft adjusts into almost any position. The comfort grip handle allows one hand operation with all the TestoView controls at your finger tips. TestoView is available in 18", 36", 48", 72" and 96" flexible wand tip lengths.

Illumination is provided by two solid state LEDs which are controlled by a three position switch, giving low, off and high output. The adjustable eyepiece allows the user to fine tune focus, while the sealed lens and shaft may be immersed in liquids without worry.

Typical applications for the TestoView 318 Series Fiber Optic Boroscopes include mold and mildew investigations behind walls, diagnosing blocked air conditioner evaporator coils (the hidden cause of many overcharged systems) and examining heat exchangers from the inside out. Plus, it can be used for feeding thermostat wires, checking for ductwork clearance and many other daily HVAC and industrial tasks.

Part #	Kit Description
0632 0318 TestoView 318-1	36" (914mm length) including batteries, mirror, magnet, instruction manual & case. Standard diameter shaft: 0.40"
0632 0319 TestoView 318-2	18" (457mm length) including batteries, mirror, magnet, instruction manual & case. Standard diameter shaft: 0.40"
400632 3181 TestoView 318-1S	36" (914mm length) with 0.23" / 6mm diameter shaft
400632 3182 TestoView 318-2S	18" (914mm length) with 0.23" / 6mm diameter shaft
400632 3184	TestoView 318-4 48" (1.2m length) 0.40" shaft
400632 3186	TestoView 318-6 72" (1.8m length) 0.40" shaft
400632 3188	TestoView 318-8 96" (2.4m length) 0.40" shaft
400632 3191	TestoScope 319-1 48" (1.2m length) 0.25" shaft
0563 3191	TestoScope Kit: 319-1 48" scope, clip-on mirror, flexible gooseneck tube, mirror and carrying case.
Note:	Special order lengths available

Specifications
Field of View	40° (319 - 50°)
Minimum Focus Distance	0.4" (10 mm)
Operating & Storage temperature	-5 to +175°F / -20 to +80°C
Light Source	2 Solid State LEDs
Housing	Nylon - black
Shaft Bending Distance	3 inch (75 mm) radius limit - (6" diameter)
Weight	Testo 318-1: 11 Oz. (318 g) Testo 318-2: 8 Oz. (227 g)
Battery type	4 AA (319 - 3 AA)
Battery Life	Typical - 25 Hours
Warranty	1 year, excludes damage caused by misuse, accidents or modifications to the product. Warranty is void if the user opens the handle for any reason.

TestoView 318 Series Fiber Optic Endoscopes, Boroscopes

Important information:

Although the shaft is filled with thousands of fibers, it can be bent repeatedly to a radius of 3" without damage. Probe tip water-proof up to handle.

Never use on or near live parts
Never use on or near live electrical circuits
Never use in explosive atmospheres
Not intended for medical or veterinary use
Avoid over-bending the shaft
Over bending will void the warranty
Do not open the handle for any reason
No user serviceable parts inside
Opening handle will void the warranty
Do not submerse the handle in any liquid
Do not immerse the shaft in any solvent for extended periods of time. Short-term resistance to silicone oils, gasoline and kerosene. Oils or petroleum products must be wiped off immediately after immersion.

Return to Brandt Instruments
For more information Email
Brandt Instruments, Inc.
    18568 Oak Grove Parkway
    Prairieville, LA 70769
1-800-337-6291
Phone: 225-673-6776
    Fax: 225-673-6725