&  




Brandt Intruments, Sperian Instruments, Biosystems, Cannonball3 gas detector with ppm readout for hydrocarbons, Dilution Monitoring for Inert Gas Environments, Multi-gas detectors for harsh environments

Representing
Sperian Instruments now
Honeywell Analytics
Biosystems Gas Detectors

 

 

 


Biosystems Index
.. Single Gas Portables..
.. Multi-Gas Portables

..   ..MultiPro
...   .MultiVision
...   .PhD6
...   .Cannonball3
.. Fixed Point Systems
.. Air Purification Panel
. .Respirator Test Bench
. .Cal Gas & Accessories
. .Application Notes

 

 
   

 

Biosystems, Sperian Instruments, Honeywell, gas detectors, MultiPro, PhD6, ToxiPro, ToxiLTD, IQ Docking Stations, PosiChek3 SCBA Testing, calibration gas

Biosystems Cannonball3™
-  PPM Hydrocarbon Readout -
-  Dilution Monitoring in Inert Environments
-

From Sperian Instruments now Honeywell Analytics

Biosystems Cannonball3 was discontinued on December 31, 2011
Sensor & all other support was discontinued on December 31, 2015


home biosystems index Biosystems Cannonball3

The Cannonball 2Biosystems Cannonball3

Biosystems Cannonball3 toxic and combustible multi-gas meter for hazardous locations can simultaneously detect up to 5 different gases including oxygen, LEL methane, CO, H2S. Available in high sensitivity ppm hydrocarbon configuration or dual pumps for accurate dilution monitoring in inert (oxygen-free) environments.

All procedures necessary for day-to-day operation, including fully automatic calibration adjustment, are controlled through a single button. Instrument configuration options and other higher functions are accessed with the four navigation arrows on the top of the instrument.

The Cannonball3 is housed in a durable impact-resistant case that is completely sealed from the outside elements, ensuring that it will operate reliably in even the most demanding environments. Three different LED alarm lights guarantee that visible alarms can be seen from any angle. The graphics display is the largest in its class, making it easy to read even from a distance. 

 

The Cannonball3 is available in either rechargeable (NiMH) or disposable alkaline battery versions. The NiMH version will provide at least 16 continuous hours of operation even with the display back light continuously on. The Alkaline version will provide at least 24 hours of continuous operation in similar conditions.

Standard Accessories: Each Cannonball3 detector is shipped complete with probe assembly including 10 feet of tubing, reference manual, shoulder strap and probe and instrument filter replacement kits. Rechargeable detectors include battery charger and internally-housed nickel metal hydride (NiMH) battery pack. Alkaline detectors include the internally-housed alkaline battery pack and 5 disposable D-cell batteries.


    

 

Cannonball3 Features

DESIGN

  • Rugged RFI-protected case designed for the most demanding environments
  • IP65 rated protection against dust and water 
  • One button operation
  • Oversized  (5" diagonal) backlit graphic display with automatic backlight
  • Super bright alarm lights visible in any direction
  • Multiple languages
  • SMART SENSORS AND CALIBRATION

  • Four sensors. O2, LEL and up to three toxic channels using Biosystems' Duo-Tox two channel CO/H2S sensor (see matrix for available sensors) 
  • Field replaceable sensors
  • One button auto calibration 
  • Calibration due reminder
  • Sensor span reserve indicators during calibration for predictive maintenance
  • High sensitivity PPM hydrocarbon sensor configuration
  •  

    RECORDING

  • Black Box recorder with over 100 hours of storage 
  • Available with optional datalogging for convenient and easy downloading to a computer
  • PUMPS
  • Filed replaceable pump module
  • Available with dual pumps for accurate dilution monitoring in inert environments without the use a dilution orifice
  • Dilution calibration regardless of tube length 
  • Automatic low flow alarm
  • Automatic leak test before every use
  • BATTERIES

  • Interchangeable Alkaline (5 "D"-cell) and rechargeable (NiMH) batteries 
  • Operating life
  • Alkaline: Up to 24 hours
  • NiMH: Up to 16 hours
  • Snap-on fast charger included with rechargeable (NiMH) configuration
  •  Recharges in 4 hours

  • Biosystems Cannonball3 Specifications

    Size: 12" x 6" x 6".
    Weight:
    Alkaline battery version 6.7 lbs.
    NiMH battery version 6.5 lbs.
    Intrinsic Safety UL     Class I Division 1 Groups A,B,C,D Temp T3C.
    CSA  Class I Division 1 Groups A,B,C,D Exia Temp T3C.
    Durability Meets IPX5 water standard.
    Display Oversized LCD display.
    Audible Alarm Two-toned alarm rated at 105 dB @ 30 cm.
    Visual Alarm Three bright red multidirectional LED alarms.
    Display Backlight Automatically-activated.
    Controls One-button automatic calibration.
    Housing Chrome metal-plated ABS. Internal RFI shielding provides RFI immunity to 40 V/m.
    Battery Options Alkaline or rechargeable NiMH (Nickel Metal Hydride) battery packs.
    Run Time 16 hrs NiMH, 20 hrs Alkaline.


    Cannonball3 Gas Detector Most Common Configurations

    Cannonball3
    Sensors Installed

    Standard Version (1pump)

    Dilution Version (2 Pumps)

    Alkaline
    (A)

    NiMH
    (N)

    Alkaline
    (A)

    NiMH
    (N)

    No Sensors Installed 54-34-00000-A 54-34-00000-N 54-35-00000-A    54-35-00000-N
    LEL / O 54-34-30000-A 54-34-30000-N 54-35-30000-A 54-35-30000-N
    LEL / O / CO 54-34-30100-A 54-34-30100-N 54-35-30100-A 54-35-30100-N
    LEL / O / CO-H 54-34-31900-A 54-34-31900-N 54-35-31900-A 54-35-31900-N
    LEL / O / H2S 54-34-30200-A 54-34-30200-N 54-35-30200-A 54-35-30200-N
    LEL / O / Duo-Tox (CO/H2S) 54-34-31400-A 54-34-31400-N 54-35-31400-A 54-35-31400-N
    LEL / O / CO / H2S 54-34-30102-A 54-34-30102-N 54-35-30102-A 54-35-30102-N
    LEL / O / SO2 54-34-30300-A 54-34-30300-N 54-35-30300-A 54-35-30300-N
    LEL / O / CO / SO2 54-34-30103-A 54-34-30103-N 54-35-30103-A 54-35-30103-N
    LEL / O / H ,S / SO,' 54-34-30203-A 54-34-30203-N 54-35-30203-A 54-35-30203-N
    LEL / O / Duo-Tox (CO/H2S)/SO2 54-34-31403-A 54-34-31403-N 54-35-31403-A 54-35-31403-N
     LEL / O / SO2 Ext. 54-34-31500-A 54-34-31500-N 54-35-31500-A 54-35-31500-N
     LEL / O / NH3 54-34-32100-A 54-34-32100-N 54-35-32100-A 54-35-32100-N
     LEL / O / CI2 (non-specific) 54-34-30800-A 54-34-30800-N 54-35-30800-A 54-35-30800-N
     LEL / O / CI2 (specific) 54-34-31800-A 54-34-31800-N 54-35-31800-A 54-35-31800-N
     LEL / O, / NO2 54-34-30900-A 54-34-30900-N 54-35-30900-A 54-35-30900-N

    The dilution version of the Cannonball3 allows for accurate gas detection in inert environments without the use of a dilution orifice.

    The detection range of the standard SO2 sensor is 0.0 - 25 in 0.1 PPM increments.
    The detection range of the extended range SO2  sensor is 0 - 100 in 1 PPM increments

    Cannonball3 Options

    Option
    Code
    Comments

    Alkaline

    A

    NiMH battery pack and charger may be purchased separately.

    Rechargeable

    N

    NiMH configuration includes charger. Alkaline battery packs may be purchased
    separately

    Datalogging

    D

    Enables the Cannonball3 to record and download measurements. This option is available as an upgrade after purchase. Download software must be purchased separately. Computer must support IrDA to download.

    TouchID™

    T

    This option includes both datalogging and TouchID™ reader. TouchID™ buttons and programming software must be purchased separately.

    Remote Alarm
    Connector

    R

    Remote alarm connector is required to connect an optional remote alarm device. Remote alarm device must be purchased separately.

    Biosystems Cannonball3 Side View Of  Meter

    Cannonball3 Meter - Side View

    Cannonball3 Smart Sensors

    Part No.
    Description
      Range Resolution

    54-25-80

    LEL

    Combustible Gas

     

    0 -100% LEL

    1 % LEL

    54-25-71

    LEL

    HC-PPM Combustible Gas

     

    0-9999 PPM
    1.0 -9.99% Vol**

    10 PPM
    0.1% LEL

    54-25-90

    O2

    Oxygen

     

    0 -30%/Vol

    0.1%

    54-25-01

    CO

    Carbon monoxide

     

    0 -1000 PPM

    1 PPM

    54-25-05

    CO+

    CO Plus dual purpose CO / H2S
    Provides a non-specific readout for CO & H2S

    CO:
    H2S:

    0 -1000 PPM
    0 - 200 PPM

    1 PPM

    54-25-19

    CO-H

    CO Minus, reduced sensitivity to H2

     

    0 -800 PPM

    1 PPM

    54-25-02

    H2S

    Hydrogen sulfide

     

    0 -200 PPM

    1 PPM

    54-25-14

    Duo-Tox

    Dual channel CO/ H2S - Provides substance specific readouts for CO & H 2S

    CO:   H2S:

    0-1000 PPM
    0-200 PPM

    1 PPM
    1 PPM

    54-25-03

    SO2

    Sulfur dioxide

     

    0-25 PPM

    0.1 PPM

    54-25-15

    SO2-Ext

    Sulfur dioxide extended range

     

    0-100 PPM

    1 PPM

    54-25-211

    NH3*

    Ammonia

     

    0-300 PPM

    1 PPM

    54-25-081

    CI2*

    Chlorine (non-specific)

     

    0-50 PPM

    0.1 PPM

    54-25-181

    CI2*

    Chlorine (specific)

     

    0-50 PPM

    0.1 PPM

    54-25-091

    NO2*

    Nitrogen dioxide

     

    0-50 PPM

    0.1 PPM

    54-25-13

    PH3

    Phosphine

     

    0-20 PPM

    0.1 PPM


    ** Vol range is dependent on calibration gas

    *Special reactive gas calibration adapter (54-36-16) required for proper calibration.

    Inert tubing is required for proper calibration and remote sampling

    Note: The non-specific CI, and CIO, sensors can be used for the detection of both gases.
                The specific CI, and CIO, sensors are designed for the target gas only.

    Most Common Cannonball3 Accessories

    Part No.
    Description

    35-0379

    Cannonball3 motorized sample draw pump module

    35-0378

    Cannonball3 motorized sample draw pump module for dual pump version (2 pumps). The Cannonball3 must be configured for dual pump.

    54-36-01

    Cannonball3 Remote audible and visible alarm.

    35-0376

    Cannonball3 Alkaline batter pack ("D"-Cell batteries not included)

    35-0377

    Cannonball3 NiMH battery pack

    54-26-0603

    Cannonball3 BioTrak Software Kit. Includes BioTrak software and manual'

    54-26-0605

    Infrared communication device Serial - IrDA -
    Requires one available PC serial or USB port

    54-27-0802

    TouchID™ programming kit. Includes software, programming wand, serial connector, 10 buttons, 10 key chain / wall mounts for TouchID™ buttons and 10 TouchID badges

    Cannonball3 Miscellaneous Accessories
    Part No.
    Description

    13-174

    Cannonball3  Reference Manual

    13-175

    Cannonball3  Quick Reference Guide

    22-143

    Cannonball3 Training Video

    42-002

    Cannonball3 Shoulder strap

    54-36-20

    Cannonball3  Gasket service kit. Includes 6 filter gaskets, 2 pump gasket, 2 battery gasket and lubricant for gaskets

    54-36-17

    Internal filter kit for Cannonball3. (10 ea. particulate and 5 ea. hydrophobic).

    Biosystems Cannonball3 Used in Tank Monitoring
    Cannonball3 Used in
    Confined Space Entry

    Cannonball3 Remote Accessories
    Part No.
    Description

    35-0379

     Cannonball3 motorized sample draw pump

    35-0378

    Cannonball3 motorized sample draw pumps for dual pump version. The Cannonball3 must be configured for dual pump.

    54-36-03

     Cannonball3 Sample probe with plastic extension and male quick disconnect

    54-36-04

     Cannonball3 Sample robe with stainless steel extension and male quick disconnect

    54-36-05

     Cannonball3 Sample robe with plastic extension and threaded for quick disconnect fitting.

    54-36-06

    Cannonball3 Sample robe with stainless steel extension and threaded for quick disconnect fitting

    54-36-07

     Cannonball3 Sample robe male quick disconnect

    54-36-08-010

     Cannonball3 Extension hose, 10 feet with male and female quick disconnect

    54-36-08-025

     Cannonball3 Extension hose, 25 feet with male and female quick disconnect

    54-36-08-050

     Cannonball3 Extension hose. 50 feet with male and female quick disconnect

    54-36-08-100

     Cannonball3 Extension hose, 100 feet with male and female quick disconnect

    54-36-09

     Cannonball3 set of male and female quick disconnects

    54-36-01

     Cannonball3 Remote audible and visible alarm

    Cannonball3 Charging, Datalogging & TouchID™ Accessories
    Part No.
    Description

    54-36-10

    Cannonball3 Snap-On fast charger 110VAC

    54-36-11

    Cannonball3 Snap-On fast charger 12VDC (Available 3' Qtr 2001

    35-0376

    Cannonball3 Alkaline batter pack batteries not included

    35-0377

    Cannonball3 NiMH battery pack

    54-36-13

    Cannonball3 Datalogger upgrade. Download software not included.

    54-26-0603

    Cannonball3 BioTrak Software Kit. Includes BioTrak software and manual

    54-26-0605

    Infrared communication device Serial - IrDA -
    Requires one available PC serial or USB port.

    54-27-0802

    TouchID programming kit. Includes software, programming wand, serial connector, 10  buttons, 10 key chain / wall mounts for TouchID  buttons and 10 TouchID badges

    54-27-0805

      10 TouchIDbuttons

    54-27-0811

    100 TouchID buttons

    54-27-0807

      10 TouchIDkey ring / wall mounts. Does not include TouchID buttons

    54-27-0812

    100 TouchIDkey ring / wall mounts. Does not include TouchID buttons

    54-27-0810

      10 TouchID badges. Does not include TouchID  buttons

    54-27-0813

    100 TouchID badges. Does not include TouchID buttons

    Computer must be equipped with infrared adapter (IrDA) to download

    Cannonball3 Calibration Materials & Carrying Cases
    Part No.
    Description

     

    54-36-14

    Cannonball3 Calibration kit. Includes foam-lined carrying case with room for up to three cylinders of calibration gas. Kit contains 12-023 regulator and other fittings. Kit does not include gas.

    35-0453

    Cannonball3 Waterproof "Pelican" style carrying case with room for one Cannonball3 and one cylinder of calibration gas

    54-36-15

    Cannonball3 Calibration tube with male quick disconnect

    54-36-18

    Cannonball3 Calibration balloon ( not for use with Cl2 and CIO2).

    54-36-16

    Cannonball3 Inert calibration tube (for reactive gases) with male quick disconnect


      WARNING! Honeywell Analytics - Biosystems equipment should only be used in conjunction with the manufacturer's instructions.
    Failure to follow such instructions could result in serious injury or fatality.

     

    Return to Brandt Instruments
    For more information  Email Mail
    Brandt Instruments, Inc. 
        18568 Oak Grove Parkway 
        Prairieville, LA  70769 
    1-800-337-6291  
    Phone: 225-673-6776
        Fax: 225-673-6725
     

    Visa, MC, AmEx, Discover Cards

    Copyright © 2002-2017 Brandt Instruments, Inc.