Brandt Intruments: Sperian Instruments, Biosystems Gas Detectors,now Honeywell Analytics, MultiPro, ToxiPro, PhD6, calibration gas,, PosiChek3 SCBA tester
Representing Biosystems by Honeywell Analytics

Biosystems, Sperian Instruments, Honeywell, gas detectors, MultiPro, PhD6, ToxiPro, ToxiLTD, IQ Docking Stations, PosiChek3 SCBA Testing, calibration gas

 

Biosystems MultiPro™ Confined Space Gas Detector
By Sperian Instruments now Honeywell Analytics

home » biosystems index » Biosystems MultiPro Detector



Biosystems Index
.. Single Gas Portables..
.. Multi-Gas Portables
..   ..MultiPro
...   .MultiVision
...   .PhD6
...   .Cannonball3
.. Fixed Point Systems
.. Air Purification Panel
. .Respirator Test Bench
. .Cal Gas & Accessories
. .Application Notes

MultiPro IQ Link  

......* * * * * * * * * * * *

..

Biosystems MultiPro Gas Detector In Gloved Hand

The Biosystems MultiPro gas detector displays real time readings for up to 4 gases, true one-button operation (including calibration). Built in event logger capable of storing information for 20 events including sensor type, max and average readings, time and duration. Available with either a Li-Ion or an alkaline battery pack with run times up to 22 hours.

Reduce your calibration gas use by up to 60% and your labor expenses by cutting down on the time needed to perform calibrations. Use with the MultiPro IQ Express™ a fully automated bump test, calibration, meter diagnostics and data download center which also provides automatic record keeping..

For remote use, both manual and motorized sample draw systems are available. The MultiPro is loaded with features that are critical for working safely in confined spaces.
MultiPro IQ Express Page Link MultiPro Specifications Link MultiPro Kit Options Page Link MultiPro Configurations Page Link MultiPro Accessories Page Link MultiPro Sensors Page Link MultiPro Chargers-Datalogging Page Link


MultiPro Gas Detector Features & Specifications

KEY FEATURES

Easy one-button operation --

The MODE button on the front of the MultiPro controls all day-to-day functions including
  • Scroll through current gas readings, MAX, STE and TWA screens
  • Initiate fresh air and span calibration sequences
  • Turn on the backlight
  • Access to Advanced Menus
MultiPro Meter with Continuous Sample Pump
MultiPro with Optional
54-49-102 Continuous Sample Pump Attached

 Sensors & Calibration --

  • Three sensors and up to four channels of direct detection. O2, LEL, and a choice of CO, H2S or Duo-Tox two channel CO/H2S sensor
  • Field replaceable sensors
  • One button auto calibration
  • Calibration due reminder
  • Sensor span reserve indicators for predictive maintenance
  • Compatible with IQ Controller and the MultiPro IQ Express

Alarms --

  • Warning, Danger, STEL and TWA alarms
  • Bright LED alarm light
  • Loud audible alarm 92dBA at one foot
  • Vibrating alarm optional

Optional slip-on motorized pump --

  • Software controlled pump
  • Powered by MultiPro battery
  • Automated pump leak test whenever the pump is attached to the instrument
  • Automatic switching between pump and diffusion modes.
Data --
  • Automatic event logger stores information for 20 events including sensor type, max and average readings, time and duration.
  • Standard black box recorder stores more than 40 hours of instrument readings .
  • Upgrade to a full datalogging instrument at any time for easy and convenient downloading to a PC.
  • Built-in IrDA port for easy communication with a PC
Compact and rugged design --
  • Exceeds IEC 1000-4-3 for level 3 RFI immunity specifications
  • Rated to IP65 against water ingress
  • Watertight, impact-resistant polycarbonate case with the added protection of an over-molded rubber boot
 Long Battery Life --
  • Li-Ion rechargeable battery provides up to 22 hours of use in diffusion mode and recharges in less than 5 hours.
  • Alkaline batteries provide up to 22 hours of use between battery changes

    MultiPro IQ Express™ Calibration & Data Download Station


MultiPro IQ Express Calibration & Data Download Station

MultiPro IQ Express Bump/Calibration Station

 

Reduce your calibration gas use by up to 60% and your labor expenses by cutting down on the time needed to perform calibrations.

Link to MultiPro IQ Express™

Click link to Open Page

 

MultiPro Specifications

Size 4.5" x 2.7" x 1.7" (11.4 x 6.8 x 4.3 cm)
Weight Alkaline:  9.9 oz. (280g)  Li-Ion:  7.8 oz. (220g)

Approvals

 

 

  • UL Class I, Division 1, Groups A,B,C,D Temp Code T4
  • UL Class II, Division 1, Groups E, F, G
  • UL Class III
  • CSA Class I, Division 1, Groups A, B, C, D Temp Code T4
  • ATEX (DEMKO) EEx ia d llC T4
  • IECEx Ex ia d IIC T4
  • CE MarkCQST (China) Ex ia d IIC T4

    RF Immunity: Conforms to EN 50270 per IEC 61000-4-3
    RF Emissions: Conforms to IEC 61000-6-4
    ESD Immunity: Conforms to IEC 61000-6-2
Durability Meets IP65 water standard
Display Front-mounted LCD simultaneously displays readings for up to 4 sensor channels
Audible Alarm Loud warbling, two-tone alarm rated at 92 dBA at one foot
Visual Alarm Bright red LED alarm visible from front and sides
Display Backlight Activates with MODE button
Controls True one-button operation including automatic calibration
Housing Polycarbonate case with over molded rubber boot
Battery Options Alkaline or rechargeable Li-Ion (Lithium Ion) battery packs
Battery Life (diffusion) 22 hours with either battery pack
Battery Life with Pump 16 hours with either battery pack

MultiPro Configurations  

MultiPro
Sensors Installed
Battery Configuration
Alkaline
Li-Ion
LEL / O2 54-48-300A 54-48-300N
LEL / O2 / CO 54-48-301A 54-48-301N
LEL / O2 / H2S 54-48-302A 54-48-302N
LEL / O2 / Duo-Tox (CO/H2S) 54-48-314A 54-48-314N
LEL 54-48-100A 54-48-100N

 
MultiPro Options (Add option code letter to the part number)

Option Code Comments
Alkaline
A
MultiPro Alkaline & Li-Ion batteries are interchangeable. Li-Ion version includes charger. Li-Ion option is not available in Value Pack configurations.
Rechargeable
N
Datalogging
D
Enables the MultiPro to download recorded measurements to a PC. This option is available as an upgrade after purchase. Download software must be purchased separately. Computer must support IrDA to download.
Vibrating Alarm
Y
Adds an internal vibrating alarm

Standard Accessories:
Clothes Clip, Operators guide, Training CD-ROM, Laminated quick reference guide, Calibration adapter.
Rechargeable Li-Ion version includes charger

Biosystems MultiPro Confined Space Kit CSK
MultiPro with Confined Space Case,
Calibration Gas & Accessories

MultiPro Accessories

MultiPro Remote Accessories
Part # Description
54-49-102 Continuous sample pump for MultiPro. Includes 10’ of sample tubing and sample probe assembly.
54-49-104 Sample draw/calibration adapter
54-49-105 Sample draw kit. Includes adapter, squeeze bulb, 10’ of tubing and sample probe assembly.
54-05-A0403 Sample probe assembly. Does not include tubing, squeeze bulb, or sample draw adapter
54-05-A0405 Sample probe assembly with 11.5-inch stainless-steel probe tube. Does not include tubing, squeeze bulb, or sample draw / calibration adapter
 

MultiPro Sensors
Part # Description Range Resolution
54-49-80C LEL Combustible gas 0 – 100% LEL 1% LEL
54-49-90 O2 Oxygen 0 – 30%/Vol. 0.1%
54-49-25 CO Carbon Monoxide 0 – 1000 PPM 1 PPM
54-49-02 H2S Hydrogen Sulfide 0 – 200 PPM 1 PPM
54-49-14 Duo-Tox Dual channel CO/H2S. 
Provides substance specific readouts for CO & H2S. 		 CO: 0 – 1000 PPM
H2S: 0 – 200 PPM		 1 PPM
Replacement Sensor Sets
54-49-200 MultiPro sensor replacement set. O2, LEL, Duo-Tox***
54-49-201 MultiPro sensor replacement set. O2, LEL, CO***
54-49-202 MultiPro sensor replacement set. O2, LEL, H2S***
***Note: This part number no longer requires return of identical set of expired sensors.

 

Biosystems MultiPro Sensor Set 54-49-200

Biosystems MultiPro Sensor Set 54-49-200

MultiPro Charging & Datalogging Accessories
Part # Description
54-49-103-1 Slip-in fast charger (110 VAC) for MultiPro. Includes "wall cube" supply
54-49-103-12 Slip-in fast charger (12 VDC) for MultiPro. Includes "cigarette lighter" style adapter, and vehicle mounting hardware)
54-49-106 MultiPro Alkaline battery pack
54-49-107 MultiPro Li-Ion rechargeable battery pack
54-49-108 MultiPro BioTrak Software Kit. Includes BioTrak software and manual
54-26-0603 MultiPro BioTrak Datalogger Upgrade. Software & activation codes. Serial Number required to order.
54-26-0605U Infrared communication device (USB – IrDA) - Uses one available PC USB Port.

 

WARNING! Hneywell Analytics - Biosystems equipment should only be used in conjunction with the manufacturer's instructions.
Failure to follow such instructions could result in serious injury or fatality.

MultiPro IQ Express Page Link MultiPro Specifications Link MultiPro Kit Options Page Link MultiPro Configurations Page Link MultiPro Accessories Page Link MultiPro Sensors Page Link MultiPro Chargers-Datalogging Page Link


 

Return to Brandt Instruments
For more information  Email Mail
Brandt Instruments, Inc. 
    18568 Oak Grove Parkway 
    Prairieville, LA  70769 
1-800-337-6291  
Phone: 225-673-6776
    Fax: 225-673-6725 

Visa, MC, AmEx, Discover Cards

Copyright © 2002-2011 Brandt Instruments, Inc.