Brandt Instruments distributing BIOS, DryCal Met Lab Precision Air Flow Calibrators & Met Lab Gas Flow Bench for Stable Calibration Flow Source Control
Brandt Instruments Distributing BIOS 
DryCal Met Lab Air Flow Calibrators


Bios DryCal© Met Lab Gas Flow Bench
For
Stable Calibration Flow Source Control

Bios Logo, Driving a Higher Standard in Flow Measurement

Proven DryCal Technology
Met Lab Gas Flow Bench for Stable Flow Source Control

Critical for Certifying Calibration of
Mass Flow Controllers, Rotameters, Bubble Meters & Flow Calibrators

 

 

 

 


Home » Bios » Bios Met Lab Gas Flow Bench
Bios Gas Flow Module for General Purpose Calibration Flow Source ControlBios NVLAP Certification
Bios Gas Flow Bench for General Purpose Flow Control

How Good Is Your Calibration Flow Source?

Your calibration results are only as good as your calibration flow source. The Bios Gas Flow Benches offer practical engineered solutions for calibration of gas flow measurement devices configured to provide the stable flow critical to the calibration process. Bios configurations use different components to connect the gas source, regulate pressure, control the flow, and direct the flow to a specific device being calibrated against a DryCal® standard.

FEATURES

 Gas flow delivery system used for calibrating mass flow controllers, rotameters, bubble meters, and flow calibrators.

 Systems iInclude an on/off valve, precision pressure regulator, high side pressure gauge, high/low flow needle valve,
        low side pressure gauge and A/B valve.

 Preconfigured to specific applications.

Bios Gas Flow Bench Series- CONFIGURATIONS

Model Features
100-025 MFC Flow Bench A Gas Flow Delivery System used for calibrating Mass Flow Controllers (MFCs) where the exhaust of the MFC is at atmospheric pressure. Includes an on-off valve, precision pressure regulator, pressure gauge, and MFC mounting stand. This flow bench is designed for a maximum gas flow of 50 Liters per min. Requires customer connection to a gas source of approximately 100 psi. For use with the Met Lab Series 5-500 sccm
100-028 Back Pressure Module This add-on Module allows calibration of device under test (DUT) at back pressure of up to 60 PSI. Includes a Pressure gauge and a Back Pressure Regulator. Requires (100-025 or 100-030H/L). This flow bench is designed for a maximum gas flow of 50 Liters per min. For use with the Met Lab Series. 14-15.9 PSI
100-029 Calibration System FTS Flow Bench Calibration Station- Definer 110/FTS calibration system includes: Gast pump, digital manometer andflow bench. In addition, an ML-500 is required for laboratory calibration of flow transfer standards such as the Bios Definer 110 or Chinook Engineering Streamline FTS. The flow bench includes an adapter and needle valve. This calibration station is designed for a maximum gas flow of 30 Liters per min. For use with the Met Lab Series.
100-030L General Purpose Flow Bench, 0 to 5 SLM A gas flow delivery system used for calibrating rotameters, bubble meters, and flow calibrators. Includes an on-off valve, precision pressure regulator, high side pressure gauge, low flow needle valve, low side pressure gauge and A/B valve. This flow bench is designed for a maximum gas flow of 5 Liters per min. Requires customer connection to a gas source of approximately 100 psi. For use with the Met Lab Series.
100-030H General Purpose Flow Bench, 5 to 50 A gas flow delivery system used for calibrating rotameters, bubble meters, and flow calibrators. Includes an on-off valve, precision pressure regulator, high side pressure gauge, high flow needle valve, low side pressure gauge and A/B valve. This flow bench is designed for a maximum gas flow of 50 Liters per min. Requires customer connection to a gas source of approximately 100 psi. For use with the Met lab Series.
100-030 General Purpose Flow Bench, 5 to 500 SLM A gas flow delivery system used for calibrating rotameters, bubble meters, and flow calibrators. Includes a precision pressure regulator, high side pressure gauge, needle valve for 5 to 50 SLM and A/B valve for needle valve outlet, two sonic nozzles for flows from 50 to 500 SLM with a A/B valve for sonic nozzle output. Requires customer connection to a gas source of approximately 100 psi. For use with the Definer 1020.

Bios Flow Bench for FTS Calibration
Bios Flow Bench for FTS Calibration

 

Back to Index

Return to Brandt Instruments
For more information  Email Mail
Brandt Instruments, Inc. 
    18568 Oak Grove Parkway 
    Prairieville, LA  70769 
1-800-337-6291  
Phone: 225-673-6776
    Fax: 225-673-6725 

Visa, MC, AmEx, Discover Cards

Copyright © 2002-2012 Brandt Instruments, Inc.

Notice: This publication is intended for general information only and should not be used as a substitute for reviewing applicable government regulations, equipment operating instructions, or legal standards. The information contained in this document should not be construed as legal advice or opinion nor as a final authority on legal or regulatory procedures. Brandt Instruments, Inc. reserves the right to make any changes to information, features, and specifications of any product without notice. Brandt Instruments, Inc. has made every effort to ensure the accuracy of information displayed on this web site, however, Brandt Instruments, Inc. is not responsible for typographical errors appearing on this web site. Price and availability information is subject to change without notice.