Brandt Instruments distributing BIOS, DryCal & Dry Cal Met Lab Precision Air Flow Calibrators (dry piston calibrator technology) Met Lab One
Brandt Instruments Distributing BIOS 
DryCal Met Lab Air Flow Calibrators


Bios DryCal© ML-1 Met Lab One Calibrator
Primary Gas Flow Calibrator


NEW  ML-1 Met Lab One™ Flow Calibrator for Corrosive Gases
 3 Auto-Ranging Flow Tubes in a Single Portable Unit


Home » Bios » Bios ML-1 Met Lab Calibrator for Corrosive Gases

 











Proven DryCal Technology
                  Bios DryCal Met Lab-1 Calibrator for Corrosive Gases













Bios NVLAP Certification


Bios ML-1 Met Lab One primary gas flow calibrators are designed to be used with corrosive gases. The innovative horizontal tube design eliminates the "dead piston time" for faster readings. Portablility allows it to be used anywhere in the facility including the factory floor for measurements.

It is intuitive and simple to operate. Control is through a color touch panel on the front of the instrument. A typical gas flow measurement only requires the user to connect the gas flow and touch "Measure" on the screen, followed by "Start". The Met Lab One will auto-select the correct tube and display the flow rate.

Bios ML-1 Met Lab One - FEATURES

 Three flow tubes in a single portable unit

 Flow ranges 5 to 50,000 sccm with a 0.15% accuracy

 Automatic selection of the correct tube - "auto-ranging" feature

 Designed for use with corrosive gases.
        (Wetted components: glass, stainless steel, AFLAS® fluoroelastomer)

 Fast - measurement speed is more than double the current ML-800 flow cells;
        gas flow is measured in both directions of piston travel

 Ultra light low friction piston - piston leakage reduced by a factor of 10 - reduced pressure pulse during reading
        (reduces errors from large connecting volumes)

 Improved reliability: wear resistant low friction coated glass piston, improved valve life

 All stainless steel flow path construction

 Ultra light horizontally driven piston does not use gravity return - less likely to get stuck from microscopic dirt

 Portable - can fit on a cart for mobile measurements

 Color touch screen display

Bios ML-1 Met Lab One - SPECIFICATIONS

Flow Range 5-50,000 sccm
   Low Tube    5-500 sccm
   Medium Tube    350-5,000 sccm
   High Tube    3,500-50,000 sccm
Measurement Gas Pressure Range 14-15.9 PSI
Temperature Range - Operating 15 to 30 C
Temperature Sensors (1 per tube) Accuracy ± 0.03% (max), sensor is located in incoming gas stream
Temperature Range - Storage 0 to 70 C
Pressure Transducer 0-16 PSI (absolute), accuracy 0.05% FS
Gas Compatibility / Wetted path materials Gases compatible with (304/316 SS, borosilicate glass, Teflon, AFLAS elastomeric)
Compressibility Factor Correction User selection of gases to apply compressibility factor correction for non-ideal gas behavior.
Language Selection for Display

English, German, Spanish, Italian, Dutch - Others available upon request.
Power Supply External Power Module
   Input 100-240VAC, 1.5A, 50-60 Hz
   Output 24VDC, 3.0A
User Interface Touch screen or via commands through data port.
Data Port Connections RS-232 and USB
Inlet & Outlet Fitting 1/2 inch VCR fitting
Approximate Measurement Interval Flow dependent (.5-50 seconds) typical 2 seconds
Dimensions 22" (56 cm) w x 15" (38cm) h x 13" (33 cm) d
Weight 62 lbs - 28 kilograms
Warranty 1 year
ROHS Compliant Yes
Measurement Uncertainty
Standardized Flow 0.15% of reading and ± 0.01 sccm
Volumetric Flow 0.15% of reading and ± 0.01 ccm

Biios MetLab ML-1 with Ed Morel, Bios VP & Engineering Manager

Ed Morrell, Bios VP & Engineering Manager
with
Bios Met Lab One

 

Back to Bios Index

Return to Brandt Instruments
For more information  Email Mail
Brandt Instruments, Inc. 
    18568 Oak Grove Parkway 
    Prairieville, LA  70769 
1-800-337-6291  
Phone: 225-673-6776
    Fax: 225-673-6725 

Visa, MC, AmEx, Discover Cards

Copyright © 2002-2012 Brandt Instruments, Inc.

Notice: This publication is intended for general information only and should not be used as a substitute for reviewing applicable government regulations, equipment operating instructions, or legal standards. The information contained in this document should not be construed as legal advice or opinion nor as a final authority on legal or regulatory procedures. Brandt Instruments, Inc. reserves the right to make any changes to information, features, and specifications of any product without notice. Brandt Instruments, Inc. has made every effort to ensure the accuracy of information displayed on this web site, however, Brandt Instruments, Inc. is not responsible for typographical errors appearing on this web site. Price and availability information is subject to change without notice.